Products & Accessories
Applications & Customer Care
Search - Contactenhanced_search
Case Studies
Turner Blog
Products & Updates
General Information
Contacts
Content Categories
Content Sections
How do I reset the memory of the TD-700?
Note – Resetting the NVRAM will refresh the memory and put all the values and calibration back to the original default settings.  This can sometimes resolve unexplained problems due to a random corruption in the memory.

1) Turn on the TD-700 and press the ESC key
2) Press the Ent key
3) Press the * key
4) Enter the ID number, 1962
5) Press the Ent key 3 times, until the display shows 1:Reset NVRAM
6) Press the 1 key
7) Press the 0 key repeated for 10 times
8) The display will change to the startup screen.
9) Press ESC key, select the Calibration Mode you had used previously and check the TD-700 for normal operation.