Products & Accessories
Applications & Customer Care
Search - Contactenhanced_search
Case Studies
Turner Blog
Products & Updates
General Information
Contacts
Content Categories
Content Sections
My SCUFA will not enter "sleep" mode after the IDL has been configured.
After you have configured the internal data logging screen in SCUFAsoft you must disconnect the serial cable and the power cable before the system will start using the IDL configuration.  Continuous Logging (24/7) or at least one daily record MUST be programmed before the IDL can activate.  Refer to page 17 of the SCUFA manual for more details on the IDL configuration.  If the serial cable is left connected to the PC the SCUFA will not power down.